公司新聞
hengye
企業案例
case
聯系我們
- 聯系人：濟南燕翔鐵藝制品有限公司
- 手機：15953126901
- 電話：18615254757
- 郵箱：785385551@qq.com
- 地址：濟南市天橋區歷山北路黃臺不銹鋼市場3區317
濟南鐵藝大門油漆施工過程注意5點
來源：http://m.imyours.cn 日期：2021-12-09 發布人： 瀏覽次數：19次
1、油漆不能混合運用
1. Paint cannot be mixed
1. Paint cannot be mixed
濟南鐵藝大門油漆施工中不同品種(化工特性)的油漆不能混合調配,并選用同類稀釋劑。
Different types of paints (chemical characteristics) in the paint construction of Jinan Iron Gate can not be mixed and mixed, and similar thinners should be used.
2、粘度適宜
2. Appropriate viscosity
2. Appropriate viscosity
濟南鐵藝大門涂刷的油漆運用前要充沛攪拌均勻,并調到適宜的粘度(稀釋程度)。
The paint applied on Jinan Iron Gate must be stirred well before use and adjusted to a suitable viscosity (dilution degree).
3、混合份額要嚴厲
3. The mixed share must be severe
3. The mixed share must be severe
運用的多組份油漆,必須按運用說明規則的份額混合均勻后再用。
The multi-component paint used must be mixed evenly according to the rules of the operating instructions before use.
4、油漆要過濾
4. The paint should be filtered
4. The paint should be filtered
油漆表面結皮或有粗顆粒狀的現象時,應采納過濾辦法,避免刷后漆膜不平坦和堵塞噴槍。
When the paint surface is crusted or has coarse particles, filter methods should be adopted to avoid uneven paint film and clogging of the spray gun after brushing.
5、干透后再重涂
5. Recoat after drying
5. Recoat after drying
每遍涂層不宜過厚,并應在徹底干透的情況下再施用第二遍以防夾生(假干)起皺。
The coating should not be too thick each time, and it should be applied a second time when it is completely dry to prevent pinching (false drying) and wrinkles.
濟南鐵藝大門的油漆施工的漂亮性有直接的影響聯系，所以在油漆施工過程中大家就要留意了。
The beauty of the paint construction of the Jinan Iron Gate has a direct influence, so everyone should pay attention to it during the paint construction process.
The beauty of the paint construction of the Jinan Iron Gate has a direct influence, so everyone should pay attention to it during the paint construction process.
下一篇：別墅常用鐵藝門類有哪些 上一篇：鐵藝護欄的防銹處理的工作流程
